Home  /  Shop  /  Research compounds
Compound data files · research use only

Research Peptide Compound Data

Seven compound files, each built around the same three things: the analytical identity of the molecule, the certificate fields a lot has to carry, and the handling notes that keep a lyophilised powder usable once it is in the lab. These are data pages, not product pages — the catalogue entry sits at the end of each one.

7compound files
5COA checks each
1:1lot to certificate

Most buyers arrive at a compound through a product page, which tells you the pack size and the price. The questions that decide whether a lot is usable are different: is the sequence what it says it is, does the certificate match the vial, and does the material survive the first reconstitution.

What each compound file contains

Compound Length Molecular weight CAS Data file
BPC-157 15 aa 1,419.54 137525-51-0 BPC-157 research peptide
TB-500 (Tβ4 17–23) 7 aa 889.0 (acetate) 885340-08-9 TB-500 research peptide
CJC-1295 (with and without DAC) 29 aa 3,647.3 / 3,367.9 863288-34-0 CJC-1295 research peptide
Ipamorelin 5 aa 711.86 170851-70-4 Ipamorelin research peptide
GHK-Cu 3 aa + Cu(II) 401.91 (complex) 89030-95-5 GHK-Cu research peptide
MOTS-c 16 aa 2,174.62 1627580-64-6 MOTS-c research peptide
Retatrutide 39 aa + C20 diacid ≈ 4,731.4 2381089-83-2 Retatrutide research peptide

Molecular weights above are for the free peptide unless a salt or complex is named. Where the supplied material carries acetate, trifluoroacetate or a copper ion, the measured mass on the certificate will sit higher than the free-peptide figure, and the difference is expected rather than a defect.

Four questions a compound file answers before a purchase order

  1. Is the sequence unambiguous? A name is not a structure. Every file lists the residue string, the chain length and any non-natural residues, so the certificate can be checked against the same string.
  2. Which form is being supplied? Free peptide, acetate, trifluoroacetate or a metal complex — each changes the mass, the solubility and the storage advice.
  3. What does the lot certificate have to show? Observed mass against theoretical, HPLC purity with the trace attached, appearance, fill, and the release date. The COA work is described per compound because the failure modes differ.
  4. How does it behave after reconstitution? Solvent, working concentration, light and oxygen sensitivity, and whether the solution can be frozen once. This is where most material is lost, not in transit.

Research use only. Everything described on these pages relates to laboratory work with research-grade material. Products are not for human or veterinary use, not for diagnostic or therapeutic use, and not for food or cosmetic manufacture.

Same name, two masses: what the number on the certificate means

Two listings can carry the same compound name and still describe different molecules. The mass on the certificate is the fastest way to tell them apart, and it is the first number to check when a delivery does not match the paperwork.

Name on the listing What it can actually be Free peptide As supplied
CJC-1295 With DAC (C-terminal Lys-maleimidopropionyl) or without DAC 3,367.9 3,647.3 for the DAC form, a difference of roughly 279 Da
GHK-Cu Free tripeptide, or the Cu(II) complex 340.38 401.91 for the complex; the blue colour and 600 nm absorbance belong to it alone
TB-500 Free peptide, or the acetate salt that is normally shipped ≈ 847 889.0 as the acetate
Retatrutide 39-residue backbone with a C20 diacid side chain ≈ 4,731.4; published molecular formulas disagree, so the file gives CAS and observed mass rather than a formula

Read the name, then read the form. A CJC-1295 listing that carries no DAC note may be either backbone, and the two differ by far more than any analytical tolerance. A GHK-Cu listing may be the free tripeptide or the copper complex, and only the complex is blue. TB-500 is usually supplied as the acetate, which is why a certificate reads near 889 rather than at the free-peptide figure. None of these are defects; they are different materials with one shared trade name.

Where sources genuinely disagree, the file says so instead of picking one. Retatrutide is that case: the published molecular formulas do not reconcile across databases, so the page carries the CAS number and the observed mass, and stops there.

Lot number, certificate and vial: the three-way check

Three identifiers have to line up before a lot can be released: the lot number printed on the vial, the lot number on the certificate, and the lot number in the supplier’s own release record. An order number is not a lot number. A certificate keyed to an order cannot be matched to a specific fill, which means it proves nothing about the material in front of you.

  • Observed mass against theoretical mass, with the analytical method named rather than implied.
  • HPLC purity with the chromatogram attached, not a bare percentage in a table cell.
  • Appearance and fill, because a collapsed cake or a short fill is visible before any instrument is involved.
  • Release date and the specification the lot was tested against, so a later batch can be compared to the same standard.

A purity figure with no trace attached leaves identity plausible and cleanliness unproven. A trace with no column and gradient recorded cannot be reproduced by a second laboratory, which makes the number unverifiable rather than wrong. Both are worth raising before an order is confirmed, and both are answered on the COA verification page.

One certificate covers one lot. Two lots of the same catalogue item can differ in purity and still sit inside specification. When a supplier sends a certificate, ask which lot it belongs to before treating it as a description of the product.

Reading a compound file against a supplier file

The compound pages are written so they can be placed next to a supplier’s documentation and compared line by line. If the sequence on the certificate differs from the sequence on this page, one of the two documents is wrong and the lot should not be released. If the mass matches but the purity trace is missing, the identity is confirmed and the cleanliness is not.

For the commercial documents that travel with an order, see the research peptide supplier file. For the certificate checks themselves, see peptide COA verification. For pack formats and per-line quoting, see bulk research peptides.

The first 72 hours after a lot arrives

Lyophilised powder is the most stable form a peptide will ever be in. Losses begin at the first opening, and most of them happen in the first weeks of laboratory use rather than in transit.

Bring the vial to room temperature before opening it. A cold vial opened in a warm room draws moisture into the cake, and the dry cake is what keeps the peptide stable. Look at the cake before adding anything: a uniform plug that has not shrunk away from the glass is what a good freeze-dry looks like, while a melted or collapsed cake suggests the cold chain failed somewhere between release and delivery.

Reconstitution is a dilution step, not a reaction. Use the solvent the compound file names, add it down the wall of the vial instead of onto the cake, and let it dissolve without vortexing. Vortexing shears the chain and produces foam that will not settle. Record the concentration actually prepared, because the figure on the label describes the powder, not the solution in the vial.

Storage follows the form rather than the compound. Dry powder at −20 °C, protected from light, is the default for most of these materials. A reconstituted solution is a different problem: it is normally held at 2–8 °C for short laboratory work and aliquoted before freezing, because a solution frozen and thawed repeatedly gives up material on every cycle.

Ordering and documentation

Each compound file ends with the catalogue entry, the pack sizes held and the batch documents that ship with the lot. Standard packs are ten-vial kits; single vials and larger fills are quoted per line. Certificates are issued per lot, so the number on the certificate is the number on the vial, not an order number.

Need a compound file for a purchasing review?

We can send the sequence, the theoretical mass, the release method summary and the certificate for the lot that will ship, before an order is placed.

VIEW CATALOGUE